|
Post by h0tr0d18 on Mar 21, 2012 13:36:49 GMT -7
Howdy howdy, I am about to start a couple sub projects for the Jeep and I am offering in on them.
1) I am building a fuel tank for my YJ, basically the same design as the Genright extreme. It should hold right around 21 - 23 gallons depending on the cutouts required to fit it in nice and snug. The fuel cell will include a 1/4" skid plate that mounts to the factory location and it will also use your factory fuel pump / sending unit if you so wish to stay with it.
2) Louver hood plate like the Poison spider stuff to aid in cooling when running the V8's
I'm not sure on the cost yet but I'm sure I can beat what is offered online, especially if I can run a couple of each off at the same time as mine. Also in the not so distant future I will be doing some lockable aluminum center consoles and front and rear bumpers. Anyway let me know if your interested as I will be ordering up my material pretty quick for the tank and hood plates.
|
|
|
Post by Boomer on Mar 21, 2012 19:07:07 GMT -7
I would be all over a rear bumper with tire carrier if that's what you are looking to do. I will be keeping an eye out!
|
|
|
Post by loosewheel on Mar 21, 2012 21:06:21 GMT -7
hey buddy i'm in for louvers TJ though and center console also need you for a couple small aluminum welds soon.
|
|
|
Post by littletj on Mar 22, 2012 6:34:09 GMT -7
I'll repeat what looswheel said. I'd be in for some hood louvres and a center console for a TJ.
|
|
|
Post by h0tr0d18 on Mar 22, 2012 13:16:18 GMT -7
Boomer, Yes I am doing my rear bumper / tire carrier soon. Mine will be a fold down, not to the side as my tail gate has been nixxed.
Looswhel / Littletj, one of you should stop by some night this weekend and I'll make a template of your hood or see if the YJ one will match up to what you need. Do you guys want them powder coated? I will be getting mine done in a semi gloss black.
|
|
|
Post by littletj on Mar 22, 2012 14:58:38 GMT -7
I can stop by on the weekend if you like. PM me your phone number and i'll text u.
Powder coat works. Bare metal may also work for me as I have the Genright side louvres and i just cleared 'em and they look pretty good. I'll have to think about it.......
|
|
|
Post by h0tr0d18 on Mar 23, 2012 9:30:43 GMT -7
Ill be home at night sat and sun, call or txt me at 780.880.9444
|
|
|
Post by tokyocollins on Mar 28, 2012 7:16:11 GMT -7
i de probably be in for a front bumper with a winch plate and some good tow points!
|
|
|
Post by h0tr0d18 on Apr 1, 2012 9:12:40 GMT -7
Tokyo, send me a txt or msg and we can figure out what your looking for. If you have an idea or pic send it to me and I'll get ya a ballpark price.
|
|
|
Post by K5 on Apr 3, 2012 19:26:03 GMT -7
I'd like an alumunum center console, lockable, water tight and with Cup and magazine holders. Not the reading type of magazines either. Also need a rear bumper that'll hold a 42" tire.
|
|
|
Post by nathanm on Apr 3, 2012 20:00:53 GMT -7
JK front bumper? I was looking at the Poison Spider brawler bumper, so something kind of basic to-the-point set up. id much rather see the money go to someone local, be a bit different too.
|
|
|
Post by h0tr0d18 on Apr 4, 2012 14:51:25 GMT -7
Just send me a txt guys and we can get together and get some measurements done up. Would love to do a JK bumper!! K5 those'd be some hunting mags right ah ha
|
|
|
Post by K5 on Apr 4, 2012 20:18:32 GMT -7
Yup, I"ll PM you.
|
|
|
Post by nathanm on Apr 5, 2012 16:12:07 GMT -7
10-4 ill be in touch once i get some days off.
|
|
|
Post by h0tr0d18 on Apr 16, 2012 15:54:42 GMT -7
So I have some time off work. If your looking for something now is probably going to be a good time to get it fanned up. Txt me, numbers above.
|
|